Coal Manufacturing Plant In Delhi India

We're here to help:
Easy ways to get the answers you need. Service Online

Coal Manufacturing Machine operation precautions

                        

The production of the Coal Manufacturing Machine breaks the method of direct crushing and crushing of the hammer head and the material block of the traditional mill. The hammer head is operated in the center of the material screening bracket, the hammer head hits the stone part, and the small block after the impact The drop enters between the sieve plate and the hammerhead, and is again hit by the hammerhead to form a fine material, and the large block after the impact is struck to form a self-forming form. The Coal Manufacturing Machine is fully resistant to impact and wear-resistant materials. Therefore, the stone is hit by the hammer and hits the sieve plate to form a counter-attack pattern, which causes the materials to collide with each other, reducing the direct impact of the hammer and the block, reducing energy consumption.

What should we pay attention to when working with a Coal Manufacturing Machine? Let the Shibang experts tell you:

1. The Coal Manufacturing Machine and power unit should be robust. If the Coal Manufacturing Machine is fixed for a long time, it should be fixed on the concrete base; if the Coal Manufacturing Machine is active, the unit should be installed on the base made of angle iron, and the power machine (diesel or electric motor) ) and the pulley groove of the Coal Manufacturing Machine is in a uniform reversal plane.

2. After the Coal Manufacturing Machine is finished, it is necessary to reflect the tightening condition of the fasteners of each part, and if it is loose, tighten it. Also check whether the belt tightness is appropriate.

3. Before starting the Coal Manufacturing Machine, first change the rotor by hand to reflect on whether the teeth, hammer and rotor can operate sensitively and securely. Whether there is a collision scene in the shell, can the torsion deviation of the rotor be consistent with the arrow pointed by the machine arrow? , the smoothness of the power machine and Coal Manufacturing Machine can be superior.

4. Do not change the pulleys at will, in case the rotation speed is too high, the explosion and destruction chamber will explode, or the rotation speed is too low, which will affect the task efficiency of the Coal Manufacturing Machine.

5. After the Coal Manufacturing Machine is started, it should be idling for 2~3min, and then the task will be charged after there is no abnormal scene.

6, the task should always pay attention to the operation of the Coal Manufacturing Machine, feeding should be average, to prevent suffocating the car, do not work long hours overload task. If you find vibration, noise, high temperature between the bearing and the body, and spray the material outward, you should immediately stop the introspection and remove the problem after the disaster.

Send A Message

You can get the price list and a SBM representative will contact you within one business day.