Marble And Granite Processing Plant

We're here to help:
Easy ways to get the answers you need. Service Online

Marble And Granite Processing Machine mainframe bearing damage

When using a Marble And Granite Processing Machine for material grinding, the bearings of the Marble And Granite Processing Machine use manual or thin oil lubrication. The reason why they are lubricated is because the bearings are wear parts and are easily worn, and the bearings are replaced. The cost is also relatively high, so we need to maintain the bearings, and this article will give you a brief introduction to the causes of damage and troubleshooting.

When using the Marble And Granite Processing Machine, we will remind users of the lubrication method of the Marble And Granite Processing Machine, and the lubrication of the Marble And Granite Processing Machine is mainly to extend the service life of the bearing, reduce the replacement cost of the bearing and the production cost of the mill. However, the reason why the bearings in the mill are more prone to failure, the main reasons are as follows.

In the Marble And Granite Processing Machine, the Marble And Granite Processing Machine bearings are mainly distributed in two parts: the bearing in the classifier and the bearing in the main grinding chamber. Among these two parts, the classifier bearings are mainly used for transmission, while the main machine Bearings are mainly used to load and transfer energy. When the bearing is in effect, it is realized by operation. Because the bearing generally works together with other fittings to form a whole, the bearing will move relative to other fittings during operation, thereby forming friction, if such friction To a certain extent, the bearing will wear out. If the wear of the bearing reaches a certain level, it will bring certain obstacles to the grinding production of the Marble And Granite Processing Machine, thus delaying the normal milling production.

In addition, when the bearing and other fittings move to each other to generate friction, if impurities such as dust are mixed between the bearing and the fitting, the friction between the bearing and other fittings will increase, resulting in accelerated wear of the bearing, and in order to avoid this Phenomenon, we will install a sealing device outside the bearing fittings to protect the bearing from dust and other impurities, thus protecting the bearing from serious wear.

In the Marble And Granite Processing Machine production, the common fault of the bearing is wear, and in order to reduce its wear and tear, we generally take the following measures: timely and timely lubrication of the bearing; do the sealing work of the bearing seal to prevent dust pollution Bearings; Marble And Granite Processing Machine bearings should be inspected in time after use for a certain period of time, and found that wear can be repaired or replaced with new, clean bearings.

Send A Message

You can get the price list and a SBM representative will contact you within one business day.